UNI-T UT181A Rms Datalogging Multimeter Higher Extended Storage 2000 Recorded Data RMS

• Trend capture function: can be a long time to monitorand record the signal change process and form a trend chart for comparison
• Higher extended storage 20,000 recorded data
• Data filtering function: can set upper and lower values of any gear and the measured object is compared, and there is an overproof alarm
• Provide more data, multiple readings can be displayedon the screen
• Double temperature measurement: intuitive and real-time temperature contrast, improve work efficiency
• Low pass filtering: can be used for the measurement of inverter and motor drives
• IP65 waterproof, dust should be used for: humid environment and dusty environment
• Powered by Li-ion: 2200mAh long endurance capacity donot replace the battery to save the cost of the purchase of battery
• True RMS 100KHZ AC frequency response
• 0.025% basic DC accuracy
• Peak hold function can record fast to 250us transient
• USB data transmission
• Design meet IEC EN61010-1 CAT IV 600V/CAT III 1000V over voltage protection, EN61010-2-030 pollution level 2 anddouble insulation safety etc; wider application range; measurement is more secure, to ensure the safety of personnel and instrumentation.

_

Specifications	Range	Best Accuracy
Model		UT181A
DC Voltage(V)	60mV/600mV/6V/60V/600V/1000V	±(0.025%+5)
AC Voltage(V)	60mV/600mV/6V/60V/600V/1000V	±(0.3%+30)
DC Current(A)	600µA/6000µA/60mA/600mA/10A	±(0.08%+10)
AC Current(A)	600µA/6000µA/60mA/600mA/10A	±(0.6%+20)
Resistance(O)	600O/6kO/60kO/600kO/6MO/60MO	±(0.05%+2)
Admittance(S)	60ns	±(2%+10)
Capacitance(F)	6nF/60nF/600nF/6µF/60µF/600µF/6mF/60mF	±(2%+5)
Frequency(Hz)	10Hz-60MHz	±(0.01%+5)
Temperature(°C)	-40 °C~1000°C	±(1%+30)
Temperature(°F)	-40°F~1832°F	±(1.5%+50)
Features
Display Count		60000
Auto Range		v
Manual Range		v
True RMS		v
Bandwidth(Hz)	100kHz	v
AC+DC		v
Low Pass Filter	1KHz(-3db)	v
Dbv/dBm		v
Continuity Buzzer		v
Diode	Around 3V	v
Duty Cycle	10% ~ 90%	v
Dual Temperature Measurement	T1, T2, T1-T2, T2-T1	v
Data Hold		v
Peak Hold		v
Relative Mode		v
Data Logging	20000	v
Trend Capture		v
MAX/MIN/AVG		v
Data Time Display		v
Data Comparsion		v
Display Type	3.5 Inches64K Color TFTL LCD (320*240)	v
Backlight Adjustment		v
Analogue Bar Graph		v
USB Interface		v
Mis-Plug Alarm		v
Battery Indication		v
Auto Power Off		v
Re-Chargeable Battery		v
Input Protection		v
Input Impedance for DCV	=10MO	v

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.

General Characteristics
Power	7.4V 2200mAh Li-ion Battery
LCD Size	70mm*52mm
Product Color	Red and Grey
Product Net Weight	638.6g
Product Size	103mm X 225mm X59 mm
Standard Accessories	Test Lead, Battery, Alligator Clip, USB Interface, BNC Probe
Standard Individual Packing	Gift Box, Carrying Bag,

• Estimated Delivery Time:
  • Metro Areas: 1-2 business days
  • Rural and Remote Areas: 2-8 business days

• Delivery Note:
  • No delivery to PO Box addresses or Parcel Lockers (please provide residential or business address at checkout)
  • Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for re-delivery
  • Please note that orders are shipped using a courier service and require a signature. If you do not require a signature for your order or the item can be left safely, please add a note to the order advising of "Authority to leave"

RETURNS POLICY

To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.

Incorrectly Ordered/Change Of Mind:

Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.

A change of mind return will only be accepted if:

• The item is in a brand new, sealed and resaleable condition
• We are contacted within 30 days of the item being received
• The item is returned to us in a timely manner

Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.

Faulty Items

We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.

Repairs

The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.