TP-Link SG3210 JetStream 8-Port Gigabit L2 Managed Switch with 2 SFP Slots Omada
TP-Link SG3210 JetStream 8-Port Gigabit L2+ Managed Switch with 2 SFP Slots
- Full Gigabit Ports: 8x gigabit RJ45 ports and 2x gigabit SFP Slots provide high-speed connections.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)*, Centralized Cloud Management, and Intelligent Monitoring.
- Centralized Management: Cloud access and Omada app for ultra convenience and easy management.
- Static Routing: Helps route internal traffic for more efficient use of network resources.
- Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.
- Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping.
- Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities
HARDWARE FEATURES
- Interface :• 8x 10/100/1000 Mbps RJ45 Ports
• 2x Gigabit SFP Slots
• 1x RJ45 Console Port
• 1x Micro-USB Console Port - Fan Quantity :Fanless
- Power Supply :100-240 V AC~50/60 Hz
- Dimensions ( W x D x H ) :11.6x7.1x1.7 in.
(294x180x44 mm) - Mounting :Rack Mountable / Desktop
- Max Power Consumption :6.8 W
- Max Heat Dissipation :23.3 BTU/h
PERFORMANCE
- Switching Capacity :20 Gbps
- Packet Forwarding Rate :14.89 Mpps
- MAC Address Table :8K
- Packet Buffer Memory :4.1 Mbit
- Jumbo Frame :9 KB
SOFTWARE FEATURES
- Quality of Service :• 8 priority queues
• 802.1p CoS/DSCP priority
• Queue scheduling
- SP (Strict Priority)
- WRR (Weighted Round Robin)
- SP+WRR
• Bandwidth Control
- Port/Flow based Rating Limiting
• Smoother Performance
• Action for Flows
- Mirror (to supported interface)
- Redirect (to supported interface)
- Rate Limit
- QoS Remark - L2 and L2+ Features :• Link Aggregation
- Static link aggregation
- 802.3ad LACP
- Up to 8 aggregation groups and up to 8 ports per group
• Spanning Tree Protocol
- 802.1d STP
- 802.1w RSTP
- 802.1s MSTP
- STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect
• Loopback Detection
- Port-based
- VLAN based
• Flow Control
- 802.3x Flow Control
- HOL Blocking Prevention
• Mirroring
- Port Mirroring
- CPU Mirroring
- One-to-One
- Many-to-One
- Tx/Rx/Both - L2 Multicast :• Supports 511 (IPv4, IPv6) IGMP groups
• IGMP Snooping
- IGMP v1/v2/v3 Snooping
- Fast Leave
- IGMP Snooping Querier
- IGMP Authentication
• IGMP Authentication
• MVR
• MLD Snooping
- MLD v1/v2 Snooping
- Fast Leave
- MLD Snooping Querier
- Static Group Config
- Limited IP Multicast
• Multicast Filtering: 256 profiles and 16 entries per profile - VLAN :• VLAN Group
- Max 4K VLAN Groups
• 802.1q Tagged VLAN
• MAC VLAN: 12 Entries
• Protocol VLAN: Protocol Template 16, Protocol VLAN 16
• GVRP
• VLAN VPN (QinQ)
- Port-Based QinQ
- Selective QinQ
• Voice VLAN - Access Control List :• Time-based ACL
• MAC ACL
- Source MAC
- Destination MAC
- VLAN ID
- User Priority
- Ether Type
• IP ACL
- Source IP
- Destination IP
- Fragment
- IP Protocol
- TCP Flag
- TCP/UDP Port
- DSCP/IP TOS
- User Priority
• Combined ACL
• Packet Content ACL
• IPv6 ACL
• Policy
- Mirroring
- Redirect
- Rate Limit
- QoS Remark
• ACL apply to Port/VLAN - Security :• IP-MAC-Port Binding
- DHCP Snooping
- ARP Inspection
- IPv4 Source Guard
• IPv6-MAC-Port Binding
- DHCPv6 Snooping
- ND Detection
- IPv6 Source Guard
• DoS Defend
• Static/Dynamic Port Security
- Up to 64 MAC addresses per port
• Broadcast/Multicast/Unicast Storm Control
- kbps/ratio/pps control mode
• IP/Port/MAC based access control
• 802.1X
- Port based authentication
- Mac based authentication
- VLAN Assignment
- MAB
- Guest VLAN
- Support Radius authentication and
accountability
• AAA (including TACACS+)
• Port Isolation
• Secure web management through HTTPS with SSLv3/TLS 1.2
• Secure Command Line Interface (CLI) management with SSHv1/SSHv2 - IPv6 :• IPv6 Dual IPv4/IPv6
• Multicast Listener Discovery (MLD) Snooping
• IPv6 ACL
• IPv6 Interface
• Static IPv6 Routing
• IPv6 neighbor discovery (ND)
• Path maximum transmission unit (MTU) discovery
• Internet Control Message Protocol (ICMP) version 6
• TCPv6/UDPv6
• IPv6 applications
- DHCPv6 Client
- Ping6
- Tracert6
- Telnet (v6)
- IPv6 SNMP
- IPv6 SSH
- IPv6 SSL
- Http/Https
- IPv6 TFTP - L3 Features :• 16 IPv4/IPv6 Interfaces
• Static Routing
- 48 static routes
• Static ARP
• 316 ARP Entries
• Proxy ARP
• Gratuitous ARP
• DHCP Server
• DHCP Relay
• DHCP L2 Relay - Management :• Web-based GUI
• Command Line Interface (CLI) through console port, telnet
• SNMPv1/v2c/v3
- Trap/Inform
- RMON (1, 2, 3, 9 groups)
• SDM Template
• DHCP/BOOTP Client
• 802.1ab LLDP/LLDP-MED
• DHCP AutoInstall
• Dual Image, Dual Configuration
• CPU Monitoring
• Cable Diagnostics
• EEE
• Password Recovery
• SNTP
• System Log - Advanced Features :• Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller
• Automatic Device Discovery
• Batch Configuration
• Batch Firmware Upgrading
• Intelligent Network Monitoring
• Abnormal Event Warnings
• Unified Configuration
• Reboot Schedule
• ZTP (Zero-Touch Provisioning)* - MIBs :• MIB II (RFC1213)
• Bridge MIB (RFC1493)
• P/Q-Bridge MIB (RFC2674)
• Radius Accounting Client MIB (RFC2620)
• Radius Authentication Client MIB (RFC2618)
• Remote Ping, Traceroute MIB (RFC2925)
• Support TP-Link private MIBs
• RMON MIB(RFC1757, rmon 1,2,3,9)
MANAGEMENT
- Omada App :Yes, through
• Omada Cloud-Based Controller (Not Supported by TL-SG2210P v4)
• OC300
• OC200
• Omada Software Controller - Centralized Management :• Omada Cloud-Based Controller (Not Supported by TL-SG2210P v4)
• Omada Hardware Controller OC300
• Omada Hardware Controller OC200
• Omada Software Controller - Cloud Access :Yes, through
• Omada Cloud-Based Controller (Not Supported by TL-SG2210P v4)
• OC300
• OC200
• Omada Software Controller - Zero-Touch Provisioning :Yes. Requiring the use of Omada Cloud-Based Controller (Supported by TL-SG2210P v3.2, v5 and above, while is not supported by TL-SG2210P v4)
- Management Features :• Web-based GUI
• Command Line Interface (CLI) through console port, telnet
• SNMPv1/v2c/v3
- Trap/Inform
- RMON (1, 2, 3, 9 groups)
• SDM Template
• DHCP/BOOTP Client
• 802.1ab LLDP/LLDP-MED
• DHCP AutoInstall
• Dual Image, Dual Configuration
• CPU Monitoring
• Cable Diagnostics
• EEE
• Password Recovery
• SNTP
• System Log
OTHERS
- Certification :CE, FCC, RoHS
- Package Contents :• TL-SG3210 Switch
• Power Cord
• Quick Installation Guide
• Rackmount Kit
• Rubber Feet - System Requirements :Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux.
- Environment :• Operating Temperature: 0-45 ? (32-113 ?);
• Storage Temperature: -40-70 ? (-40-158 ?)
• Operating Humidity: 10-90% RH non-condensing
• Storage Humidity: 5-90% RH non-condensing
Shipping Policy: Please note: We generally do not ship to PO BOX or Parcel locker. Please concoct us for special arrangement before you place an order for these addresses. All items will be shipped to buyer's address. If you are in a Suburb/Town, please put the Suburb/Town name on the City line directly. Please double-check your shipping address when you make the payment. Buyer is responsible for any extra postage cost caused by incorrect shipping address. All items will be shipped within 24-72 business hours upon receipt of payment. In most cases, delivery takes around 1-7 business days, it's highly depended on the efficiency of the shipping carrier. Estimated delivery date is calculated by carrier's system, delivery times may vary, especially during peak periods.
Address Changes: If you enter the incorrect name or shipping details and the item is returned to us, you will be subject to a RTS(return to sender) fee if we are unable to change the details before dispatch, and well as a reshipping fee (dependent on the items weight). We are not responsible for these changes if there is a mistake entered by the buyer. This fee is typically anticipated to be $10.50 for RTS + stander postage for re-shipment, regardless of Sale value
30 DAY MONEY BACK RETURN POLICY
If you are unhappy with your item for whatever reason, simply return it to us for a replacement, or refund.
The item must be returned in its original packaging/condition for change of mind purchases, please note a 20% deduction fee applies to any change of mind returns, minimum $10. The buyer is liable for the return postage. This also applies to orders cancelled when the item has already been dispatched from our warehouse.
Please note we only accept change of mind returns if it is returned in a saleable condition with original packaging. By saleable condition we mean that the item hasn’t been opened with factory sealed, is still in its original packaging and all manuals, packaging and accessories are included. If the item is missing the original packaging, or in the original packaging but damaged, or unsaleable condition, then unfortunately we won't accept this return. All items we sell come with a unique serial number. The serial number of the returned item must match the item we sell.
DOA Warranty Claims Policy
For items Dead on Arrival (DOA), Damaged in Transit, Faulty, or Delivered Incorrectly, please immediately contact our Customer Service team. We will assist you in resolving any concerns by possibly having the product returned in suitable packaging (preferably its original packaging).
Please Note:
A replacement or refund will be issued after the faulty item has been returned to us. Assessment may apply in some circumstances before a refund or replacement can be issued.
Standard Warranty Claims Policy
Items found to be faulty outside of the DOA period will be subject to standard warranty terms. ALL of our products are supported by a minimum 12 month return to base warranty. This warranty covers all manufacturer faults with the product. Please contact the product's manufacturer for troubleshooting first and more details about warranty terms.
Please note:
The customer will be responsible for any return postage costs.
The processing time is generally 2-4 weeks from when we receive the faulty unit.
The Warranty claim may result in a repair, new or refurbished replacement, or refund depending on manufacturer approval.
The customer should provide their invoice number and item's serial number when contacting us.