SAL SES70802TC-BK - Stargem III Twin 2 x 15W LED Floodlight Tri-Colour with PIR Sensor Black

The SAL SES70802TC-BK is a twin 15W LED floodlight rated IP54 for wall mounting, featuring selectable tri-colour temperature (3000K / 4000K / 5700K) and integral PIR motion sensor. The SES70802TC-BK is ideal for residential security lighting, with a 12-metre detection range and 180-degree sensor coverage for entry points and outdoor perimeters.

Security lighting on residential buildings often relies on a single colour temperature, which limits flexibility as seasonal daylight shifts. The SES70802TC-BK addresses this by allowing the colour temperature to be switched between warm white (3000K), neutral white (4000K), and daylight (5700K) using a simple dip-switch, so the light output adapts to the surrounding environment and building finish. The IP54 rating suits most exterior locations, and the PIR sensor with manual override function reduces reliance on scheduled timers. Many DIY installers and trade professionals wired it straight into existing outdoor circuits without the complexity of smart controllers.

The SES70802TC-BK delivers practical value in security installations and renovation upgrades. Detection distance reaches 12 metres at 2.5 metres height, covering typical residential entry zones without the need for multiple fittings. Tri-colour selection via dip-switch simplifies commissioning, and lux and time adjustments on the PIR let the installer fine-tune sensitivity to site conditions without returning to the circuit breaker. The 30W power draw sits comfortably on standard 10A circuits shared with other exterior fittings, and the twin-head design distributes light across wider areas than single-head competitors.

• Twin 15W LED heads - two independently angled light sources provide 2400-2600 lumens depending on colour temperature, covering wider coverage than single-head floodlights.
• Tri-colour selectable temperature - dip-switch choice between 3000K (warm white), 4000K (neutral white), and 5700K (daylight) to match building finish and seasonal light conditions.
• IP54 weather rating - suitable for most exterior wall mounting; splash and dust resistant but not fully submersible or suitable for constant water spray.
• PIR motion sensor 180-degree coverage - detection angle of 180 degrees, detection distance approximately 12 metres at 2.5 metres mounting height, ideal for entry monitoring.
• Manual time adjustment - controls how long the light stays on after motion is detected (MIN for short duration, MAX for extended operation).
• Lux/light-level adjustment - photocontrol sensor tuning (DAWN symbol for daytime operation, MOON symbol for night-only activation) prevents nuisance triggering in bright daylight.
• Sensitivity control - PIR motion sensitivity dial (MIN for low sensitivity, MAX for high sensitivity) allows fine-tuning for the site without re-wiring.
• Manual override function - switch off and on twice within six seconds to enable permanent-on mode; switch off and wait ten seconds to return to automatic motion-sensor operation.
• Black aluminium optical head - robust adjustable assembly with durable polycarbonate mounting base and opal diffuser, designed for outdoor durability.
• 240V mains powered - no battery dependency; low standby consumption suitable for 10A MCB or RCD protection on standard residential circuits.
• CRI 80 colour rendering - natural colour reproduction for residential environments; 3000K warm white suits traditional buildings, 5700K daylight suits modern finishes.
• Non-dimmable LED driver - integral non-dimmable driver; not compatible with dimmer switches, but standard on-off wall switches work correctly.

• Entry and front-door zones - the SES70802TC-BK provides motion-activated security lighting for residential entries, letterboxes, and steps where intruder detection is important.
• Carport and parking areas - twin LED heads illuminate driveway and car-parking surfaces, reducing security risk and assisting vehicle entry in darkness.
• Side and back-garden perimeters - the 12-metre detection range covers typical residential boundary lines; lux adjustment prevents false triggering from passing cars or animal movement at distance.
• Garage and outbuilding security - motion-activated operation on sheds, workshops, and external storage, reducing lighting costs for buildings used intermittently.
• Renovation upgrades to older installations - replaces hard-wired timer-based floodlights with modern PIR control; the SES70802TC-BK accepts standard 240V mains circuits without rewiring.
• Building-finish matching via colour selection - tri-colour switch allows 5700K daylight for contemporary finishes, 3000K warm white for heritage or rendered brick, 4000K neutral for compromise lighting.

The SES70802TC-BK is not rated for constant water spray, wet-location submersion, or fully sealed weatherproof enclosures. Do not install in bathrooms, wet laundries, splash zones, or locations where water ingress is likely. IP54 is suitable for sheltered exterior walls and undercover areas; it is not a marine-grade or submersible product. Not suitable for dimmable wall switches.

SETTINGS:

• TIME controls the duration of time the fixture stays on once activated (MIN for shorter duration, MAX for longer duration)
• SENS controls the sensitivity of the Motion Sensor (MIN for lowest sensitivity, MAX for highest sensitivity)
• LUX controls the sensitivity of the Photocontrol Sensor (DAWN symbol is for the Daytime function, MOON symbol is for the Nightime function)

MANUAL OVERRIDE:

• To enable 'Manual Override' or 'Permanent On', simply switch off and on twice within six seconds. The lights will now stay on permanently. To return to 'Automatic Mode', switch the unit off and switch it on again after ten seconds. The unit will resume normal operation.

Verified Sparky Direct customer reviews: Stargem III Twin 2 x 15W LED Floodlight Tri-Colour with PIR Sensor Black (SES70802TC-BK)

"Great quality lights." - Michael Gibson

"Works well" - Nathan

"Excellent SAL product range, competitive pricing and quick delivery" - Sherbie

Delivery varies by location, please see the expected timeframe to receive your product below:

• Metro: 1-3 business days

• Regional: 1-6 business days

If you are unavailable at the time of delivery re-delivery fees may apply.

100-Day Fuss-Free Returns
We want you to love what you buy-but if you change your mind, that's okay too. That's why Sparky Direct offers a .

• Items must be unused, with all parts, accessories, and original packaging.
• We can't accept returns if the product is damaged, incomplete, or not in resalable condition.
• Proof of purchase is required.
• Return shipping is the responsibility of the customer. 

If your item isn't in its original condition, please contact us before returning it-we might save you time and money.

All products come with a manufacturer's or supplier's warranty

• Warranty starts from the Invoice Date
• Some suppliers offer in-home warranties and handle claims directly, so you won't need to uninstall or return the product.  with us to check if your product qualifies.
• Sparky Direct isn't responsible for losses caused by product failure.
• Warranties are void if products aren't installed by a licensed electrician.

Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.

• Sparky Direct will pay for return shipping via an emailed return label.
• If the fault is confirmed, we will send you a replacement item or provide a refund.

Contact us via our  to arrange the return.

Exclusions
We can't accept returns for:

• Items that have been installed, modified, or used
• Clearance, End of life, Discontinued, or special order items (unless faulty)
• All PPE Items
• Goods returned without original packaging or proof of purchase

How to Request a Return

1.  our customer service team with your order number.
2. Confirm it's eligible under our return or warranty policy.
3. Pack the item securely and return it using a trackable service.
4. Once we receive and inspect it, we'll process your refund or replacement.

Warranty starts from Invoice Date

Domestic Use: 5 Year replacement
Commercial Use: 3 Year replacement
Warranty Method: Return to Sparky Direct