K-9308 D8XCEL4G PANEL WITH NAVIGATOR

K-9308 D8XCEL 4G PANEL WITH NAVIGATOR KEYPAD

Ness D8X control panels offer the widest possiblecombination of standard features and options to provide users and installers with the most powerful and flexible security panels ever made by Ness.

Features:

New in XCEL 4G

• 4G Cellular Communicator onboard
• Operation via SMS messaging
• Programming via SMS
• Alarm reports via SMS self-monitoring or Central Station
• Central Station monitoring in Contact ID and ARMOR IP formats
• Remote operation and programming via the free NessXCELapp
• The panel is not network locked. Activate the suppliedNess SIM or BYO SIM
• New PCB layout, AUX5~8 header added

D8XCEL4G Features

• 8 alarm zones.
• Supports up to 3 keypads (Navigator, Saturn or LCD)
• 56 user codes can be programmed to operate by keypad PIN, radio key or access card.
• Optional Ness Radio Interface for fully integrated wireless security.
• 3 Door Access Controller onboard with support for Weigand prox or fingerprint readers.
• Programmable Two Area partitioning can split the panelinto two independent areas plus a common area.
• Real Time Clock with AutoTime features - auto arm/disarm, auto aux outputs, time based user control.
• Home Mode allows partial arming, (eg, perimeter security overnight).
• Day Mode feature for daytime security of fire doors, coolrooms etc.
• Temporary Day Zones allows easy enabling/disabling of Day Mode.
• Keypad Panic & Duress feature.
• Fire Alarm feature with different siren tones.
• Highly flexible zone to output mapping.
• Onboard Vibration Sensor Analyser with programmable sensitivity.
• Use with Nessensor? vibration sensors.
• Multiple programmable EOL resistor values from 0k to 22k (2k2 resistors supplied).
• Siren chirp and strobe flash on arming with radio key.
• Quiet chirps option on arm/disarm by radio key.
• True Dynamic Battery Test actively tests the battery under load every hour and every time a keypad code is entered.
• 8 programmable auxiliary outputs.
• Enhanced serial data input/output via RS232.
• Automatic reset fuses.
• 30 event memory can be reviewed by LCD keypad or 80 event memory when using the Ness
• Navigator keypad or NessComms software.
• Standard defaults to suit most applications.
• Easy programming by keypad, SMS or NessComms? software.
• All programming data is permanently stored in a non-volatile memory.
• All inputs and outputs are heavily protected against lightning and high voltage supply transients.
• Dual voltage power input, 17VAC or 20VD

• BOX DIMENSIONS (W x H x D) 235 x 300 x 90 mm (Plastic housing)
• POWER INPUT 17VAC or 20VDC
• AUX POWER OUTPUT 13.8v DC @ 800mA
• QUIESCENT CURRENT DRAW 80mA with 1 keypad
• RECHARGEABLE BATTERY 12 volt 7.0 Amp/hour Sealed leadAcid
• BATTERY CHARGING CURRENT 350mA maximum, current limited
• DYNAMIC BATTERY TEST Backup battery is tested under load, hourly and on arming.

Ship out the order within 24-48 hours.

Change of mind:
Customer can return the item if purchased by mistake within 14 days of the customer’s order being received.

Change of mind returns will only be eligible for a refund on the product’s sale price within receiving the item'. Return postage is paid by the customer.

Warranty

Without prejudice and to the extent allowed by the Trade Practices Act 1974, The Australian Consumer Law and Competition and Consumer Act 2010, all hardware sold by MAD Electronics Australia is covered by one year limited warranty and is also backed by Australian manufacturer warranty. Where the manufacturer warranty period exceeds one year, we will advise the customer to contact the manufacturer directly for warranty support after the first year of purchase. Due to the nature of consumables products and software, they are not returnable or refundable items.

Any defective products purchased from MAD Electronics Australia and affiliates that fall within the warranty period provided will be covered, unless they fall within the following conditions:

· Physical Damage on the product not caused in the event during transit or Dead on Arrival (DOA) but caused due to mishandling, incorrect use of product for its purposes, improper installation of product, by accident, insect or vermin infestation, improper method or failure to maintain service and handle the item with reasonable care.

· The product has been modified using unauthorised methods. Any modifications on the product including physical and software modifications using third party unauthorised software such as third party firmware updates will void the warranty of products.
· The warranty seal or serial number of the item has been tampered with.
· The item has been serviced by another party other than madelectronics
· Consequential loss including but not limited to data, programs, software or other information stored on storage products, computer or laptop systems.
· Software

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.