Phrozen Protowhite Rigid Resin 1kg

Protowhite Rigid Resin - Design Prototyping Made Easy

Empowered by one of the most prestigious chemical company BASF Forward AM , Phrozen Protowhite Rigid Resin enables designers to conduct in-house prototypes efficiently before moving onto the manufacturing stage.

SPECIFICATIONS

• Density: 1.1 g / cm3
• Viscosity 30oC: 220 mPas
• E Modulus: 2300 MPa
• Ultimate Tensile Strength: 57 MPa
• Elongation at Break: 15 %
• Flexural Modulus: 1920 MPa
• Flexural Strength: 94 MPa
• Charpy notched, 23 oC: 1.9 kJ/m2
• HDT at 1.82 MPa: 49 oC
• Surface Hardness, Shore D: 77 Shore D

BENEFITS

• Rigid Resin Empowered by BASF Forward AM: Phrozen Protowhite Rigid Resin empowers industrial designers to solve design challenges and increase efficiency during the design validation phase by creating rigid and impact resistant 3D models.
• Visualize Your Design Ideas With Ease: Turn conceptual ideas into complex 3D models to showcase small batches of high-quality prototypes for more efficient communication.
• Best for Prototype Developments: Experiment and compare various 3D printed prototypes such as mechanical parts, jigs, fixtures, and glasses to refine design usability.
• Save Time With Rapid Prototyping: Demonstrate 3D models and gather feedback from peers to identify improvements and reduce risks of design defects before going into full-scale production.

PRECAUTIONS

• Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year.
• Post-processing note: For best results, please allow your print to dry for 40 to 60 minutes after wash, then postcure on both sides, 30 minutes per side.
• Minor color differences between the printed parts and website pictures do not impact the final performances.

Ship out the order within 24-48 hours.

Change of mind:
Customer can return the item if purchased by mistake within 14 days of the customer’s order being received.

Change of mind returns will only be eligible for a refund on the product’s sale price within receiving the item'. Return postage is paid by the customer.

Warranty

Without prejudice and to the extent allowed by the Trade Practices Act 1974, The Australian Consumer Law and Competition and Consumer Act 2010, all hardware sold by MAD Electronics Australia is covered by one year limited warranty and is also backed by Australian manufacturer warranty. Where the manufacturer warranty period exceeds one year, we will advise the customer to contact the manufacturer directly for warranty support after the first year of purchase. Due to the nature of consumables products and software, they are not returnable or refundable items.

Any defective products purchased from MAD Electronics Australia and affiliates that fall within the warranty period provided will be covered, unless they fall within the following conditions:

· Physical Damage on the product not caused in the event during transit or Dead on Arrival (DOA) but caused due to mishandling, incorrect use of product for its purposes, improper installation of product, by accident, insect or vermin infestation, improper method or failure to maintain service and handle the item with reasonable care.

· The product has been modified using unauthorised methods. Any modifications on the product including physical and software modifications using third party unauthorised software such as third party firmware updates will void the warranty of products.
· The warranty seal or serial number of the item has been tampered with.
· The item has been serviced by another party other than madelectronics
· Consequential loss including but not limited to data, programs, software or other information stored on storage products, computer or laptop systems.
· Software

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.