Zap Adhesive Slo-Zap Ca- 2oz Pacer11730069
Slo-Zap (Thick - Yellow)
SLO-ZAP CA
- Very high viscosity formula
- Super thick and super strong
- Allows part positioning for approximately 30-40 seconds.
- Use Zip Kicker to accelerate cure time
- Available in 2 sizes
SLO-ZAP CA
Slo-Zap is our thick viscosity. The thicker the formula, the slower the cure time, that's why we call it SLO-ZAP. This liquid has a similar viscosity to general maple syrup. Penetration into porous materials is very minimal. SLO-ZAP is has superior gap filler qualities for imperfect joints. Slo-Zap also offers extra working time for positioning wood parts.
Hobby: In modeling its ideal for laminating wood parts and for those modelers that are looking for some additional working time. Use the Z-End for forming fillets. Because its thick, it will not run or wick into the wood for all types of joints. The high cured strength means it works great on higher stress areas. Use it on fiberglass and fabric to partially fill in the weave and to bond the cloth to the substrate.
WOODWORKING: For older and softer woods Slo-Zap is great for loose joints as it will fill the gap and not over wick into the wood. Wood turners use this product as the final filler when repairing larger cracks. Furniture refinishers use this glue in conjunction with zip kicker to repair loose chair rungs, and mortis and tenon joints. Mold and pattern shops use it to fill in cracks and seams. When dry it produces a very hard surface.
Helpful Hints:
This glue is SLOW but STRONG!! Use it on harder types of wood. For maximum strength let SLO-ZAP cure on its own, best accomplished by providing some light to medium clamping pressure on the pieces to be joined. SLO-ZAP will set up faster when sprayed with kicker, the outside will cure immediately but still allow about 30 seconds to allow the inside to fully cure. To speed the cure time and still have a few seconds of positioning, spray ZIP KICKER on one part, let dry, apply SLO-ZAP to the other, then join the two parts. When fixing furniture joints, separate the parts if possible, treat the tenon or rung with ZIP KICKER, making sure not to get any on the other part, let the kicker dry, put SLO-ZAP in the mating part and join the two together. When using on fiberglass cloth or fabric spread it across the material with an old playing card, business card, or a soft plastic spreader. For critical applications test sample joints for designed strength requirements.
Delivery varies by location, please see the expected timeframe to receive your product below:
- Metro: 1-4 business days
- Regional: 1-10 business days
Change of Mind Returns: We may provide you with a product exchange or refund only when we receive the returned product. You are responsible for payment of return postage on your order.
Normal Australian Consumer Law protections apply.
Customer should cover the return shipping for change of mind purchases, if the item is still new, unused and sealed in original packaging a full refund will be processed once item is returned. ( Items must be returned within a reasonable timeframe after receiving the order)
Address Changes: If you enter the incorrect name or shipping address details and the item is returned to us via Australia Post, you will be subject to a RTS(return to sender) fee. You will also be responsible for reshipping charge
Return process: If you have a problem with your goods, please contact us within a reasonable timeframe after receiving the order. We will investigate your issues and advise whether your product may be returned and how to return your goods.
Once an item is returned we will either inspect your goods and investigate any claimed defect or in some cases, send the goods to third parties for assessment and/or repair.
If we do not believe a remedy is applicable upon inspecting your goods (for example, where we believe the goods have been misused, or there was a failure to use in accordance with manufacturer's instructions, used it in an abnormal way or there has been a failure to take reasonable care), we will reject your claim and return your goods to you. You must cover the cost of return shipping in order to receive goods we have rejected on inspection, and we will provide you with instructions on how to make this payment.
Any refunds will be issued using the payment method used for purchase. We aim to process refunds and replacements within a reasonable timeframe after receiving the order.