EARTHQUAKE MINIMEDSPP8B Minime 8" Powered Subwoofer Dsp Amplifier and Slaps MINIMEDSPP8B

The MiniMe DSP P8 system is designed to dramatically enhance your enjoyment of music and movies at home by adding power and impact to low-frequency sound effects without taking up your entire living space. With the continued success of the MiniMe DSP series of home subwoofers, Earthquake felt that a smaller sibling was to help complement the line. Just under a foot wide, the MiniMe DSP P8 brings deep, dynamic, and impactful bass to virtually any space or room._The all-new MiniMe DSP P8 utilizes Earthquake's unique class "D" circuitry with over 90% efficiency with the added advantage of DSP control through mobile devices. Complicated and professional room tuning is now made possible right at your fingertips through a mobile app allowing users to tune the MiniMe DSP P8 for flexible subwoofer placement in any room. Like the 10, 12, and 15-inch models, the DSP 8 offers users some of the same great performance and features like 600 watts of brute peak power output, high-EMF XLT active driver, and redesigned 8-inch mass-tuned SLAPS-M8 passive radiator with increased excursion potential._Without a doubt, the MiniMe DSP P8 is one the best 8-inch subwoofers ever produced by Earthquake and is sure to fill a small to medium-sized room with massive bass for the utmost in sound quality and intense room-rumbling sound effects. It is available in both black or white high gloss piano finishes and with the dual active and passive driver setup. With a compact 10-inch cube enclosure, don't let the size of this little monster fool you. It offers users high performance and superb bass control with a sound that remains dynamic, punchy, and precise even under hard and continuous operation. Transform your listening experience with the all-new MiniMe DSP P8 subwoofer._

In order to optimize sound and clarity on a subwoofer, it must be tuned properly to its environment. Through an automated room correction process that the iWoofer™ Pro app offers, you will get the customized performance that you deserve and achieve the maximum amount of SPL with a more linear response for your home theater. Up to a 48dB/octave crossover is also available within the application for a steep frequency cutoff.

SLAPS passive radiator technology doubles the radiating surface and allows the DSP P8 to play louder and lower without unwanted port noise distortion. SLAPS technology is a key player in translating the MiniMe DSP P8 amplifier's high power into dominating LFE. It is a patented system that dramatically increases subwoofer efficiency and capability for ultra-low frequency reproduction. SLAPS stands for Symmetrically Loaded Audio Passive System. As the name indicates, it is built symmetrically, which distinguishes it from traditional passive devices on the market. It integrates identical components in its suspension and design, ensuring the unit moves identically in both directions. The revolutionary efficiency and performance are the result of the pneumatic coupling between SLAPS and the active driver. SLAPS overcomes the limitations known from conventional closed and ported designs that prevent radical excursion and deep response. SLAPS allows the active driver compression-free movement, resulting in deep, dynamic, and hard-hitting bass response. Reach dominating LFE with Earthquake SLAPS technology.

The MiniMe DSP P8 is covered in deep, luxurious black or white piano lacquer. The cabinet finish begins with thorough sanding and priming, followed by multiple applications of black lacquer with additional fine sanding between layers. The cabinet is then finished with a smooth, high gloss clear coat. The elegant piano lacquer complements its sleek modern design and adds sculptural finesse and exclusivity to your home.

• Stylish & Ultra-Compact Subwoofer With Superb Low-Frequency Response
• Small form factor with a 10-inch cubed enclosure
• Built-in high-efficiency Class D amplifier
• Premium 8? high-EMF XLT active driver
• Non-pressed fiber cone
• Inverted edge reinforced poly dust cap
• Wide polyether foam surround
• Redesigned 8? mass-tuned SLAPS-M8 passive radiator system
• Double the radiating surface for an impactful response
• Ported with SLAPS passive bass radiator
• Built-in Digital Signal Processor (DSP) for enhanced bass performance
• 600W high-efficiency class D amplifier
• DSP control through the iWoofer™ mobile app
• Multi-path optocoupler protection circuitry
• Automatic signal sensing turn on and standby mode
• Auto room correction (iWoofer™ Pro only)
• 3-Way Auto/On/Off mode switch
• Sub-operation switch for different ranges
• DSP On/Off selector switch
• SHS (Sub-harmonic Synthesizer)
• Selective variable crossover
• 0-180° phase adjustment
• Operation status LED indicator
• Low-level RCA inputs
• RCA Mono DSP output
• Remote & remote eyes included
• Removable grilles included
• Luxurious high gloss black piano lacquer finish

• Driver Size:
• 8? active driver
• 8? SLAPS passive radiator (Tuned to 27Hz with 160g added mass)
• Amplifier Power:
• 300W RMS / 600W peak dynamic
• Frequency Response: 25-160Hz
• Crossover Frequency: 40-160Hz
• Nominal Impedance: 8-Ohm
• Input Impedance: 20 kOhm
• Enclosure Type: Ported with passive radiator
• Enclosure Finish: Black Piano Gloss
• Dimensions : H x W x D: 11" (278mm) x 10.43" (265mm) x 11.41" (290mm)
• Weight: 18.2 lbs (8.25 kgs)

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.

• Estimated Delivery Time:
  • Metro Areas: 1-2 business days
  • Rural and Remote Areas: 2-8 business days

• Delivery Note:
  • No delivery to PO Box addresses or Parcel Lockers (please provide residential or business address at checkout)
  • Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for re-delivery
  • Please note that orders are shipped using a courier service and require a signature. If you do not require a signature for your order or the item can be left safely, please add a note to the order advising of "Authority to leave"

RETURNS POLICY

To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.

Incorrectly Ordered/Change Of Mind:

Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.

A change of mind return will only be accepted if:

• The item is in a brand new, sealed and resaleable condition
• We are contacted within 30 days of the item being received
• The item is returned to us in a timely manner

Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.

Faulty Items

We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.

Repairs

The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.