Aruba AP-615 Tri Band 802.11ax 3.60 Gbit/s Wireless Access Point - Indoor - 2.40 GHz, 5 GHz, 6 GHz - Internal - MIMO Technology

Aruba AP-615 Tri Band 802.11ax 3.60 Gbit/s Wireless Access Point - Indoor - 2.40 GHz, 5 GHz, 6 GHz - Internal - MIMO Technology - 1 x Network (RJ-45) - 2.5 Gigabit Ethernet - Bluetooth 5 - 5.60 W - Ceiling Mountable - 1 Pack

For enterprises who need more wireless capacity and/or wider channels, Aruba 610 Series Campus APs are designed to take advantage of the newly available 6 GHz spectrum using a unique dual-radio/tri-band architecture. Adding support for the 6 GHz band to the traditional 2.4 GHz and 5 GHz bands more than doubles the available wireless capacity in a wireless network - so you can meet growing demand due to bandwidth-hungry video, increasing numbers of client and IoT devices, and growth in cloud.

Unique to Aruba, the 610 Series features two radios that can be tuned to any two of the three available spectrum bands for Wi-Fi (2.4 GHz, 5 GHz, 6 GHz). This flexibility provides a cost-effective and compact platform that delivers full tri-band coverage as part of a multi-AP deployment and can be used with software that will intelligently and flexibly configure the radios of each of these dual-radio APs.

More capacity and wider channels

The Aruba 610 Series APs are designed to take advantage of Wi-Fi 6E and the 6 GHz band, which translates into far greater speeds, wider channels for multi-gigabit traffic, and less interference. Its two 2x2 MIMO radios deliver a combined peak data rate of up to 3.6 Gbps when configured for concurrent 5 GHz and 6 GHz operation.

Advantages of 6 GHz

Wi-Fi 6E provides up to 1200 MHz of additional unlicensed spectrum in the 6 GHz band for higher throughput and improved application performance. With up to seven 160 MHz channels, Wi-Fi 6E can better support low-latency, bandwidth hungry applications like high-definition video and augmented reality/virtual reality applications. Only Wi-Fi 6E capable devices can use the 6 GHz band so there is no interference or slowdowns due to legacy devices.

Device class support

The Aruba 610 Series APs are part of the low power indoor (LPI) device class. This fixed indoor-only class uses lower power levels and does not require an Automated Frequency Coordination service (AFC) to manage incumbent outdoor services, which is required for standard class APs.

Global readiness

While the need for more Wi-Fi capacity is recognized across the globe, countries are approaching the 6 GHz band differently. The 610 Series APs are set up to automatically update regulatory rules once Wi-Fi 6E regulations have been approved and certified.

Extend the benefits of Wi-Fi 6

The Aruba 610 Series APs are based on the 802.11ax (Wi-Fi 6) standard, which means that all its efficiency and security enhancements are also available on the 6 GHz band. Wi-Fi 6 features such as Orthogonal Frequency Division Multiple Access (OFDMA), BSS coloring etc. are fully supported on the Aruba Wi-Fi 6E access points as well.

Features

• Unlocks the 6 GHz band to more than double the available capacity in wireless networks
• Comprehensive dual radio/tri-band coverage across 2.4 GHz, 5 GHz, and 6 GHz to deliver up to 3.6 Gbps combined peak data rate
• Compact and low power consumption - virtually unrestricted operation from an 802.3af (class 3) PoE source
• Up to seven 160 MHz channels in 6 GHz to support low-latency, bandwidth-hungry applications like high definition video, and augmented reality/virtual reality applications
• 2.5 Gbps Smart Rate Ethernet port to minimize wired bottlenecks
• Built-in GPS receivers and fine time measurement (802.11mc) to enable APs to automatically locate themselves and serve as reference points for accurate indoor location measurements

We dispatch order within 1 business day, We are providing the free shipping service via Australia Post and Aramex or Couriers please to deliver the parcels, it usually takes about 2-6 business days to receive the order.

DOA Returns:

In the event that your item has arrived faulty, please inform us within 7 days of receiving the item. We will organise a replacement or refund after the faulty item has been returned in its original conditions with full packaging. The processing time for DOA is generally 1-2 weeks from the time we receive the returns, since we will send the faulty item to the manufacturer for testing.

Warranty Returns:

Standard manufacturer's warranty will apply after DOA period, and within the specified warranty term (commonly 12 months). No warranty applies to software, accessories and consumables. Physical damage is not covered by DOA or Warranty.

Change of Mind Returns:

If you change your mind about a purchase, it is at our discretion to accept a return for refund. We will generally accept a return provided you contact us within 7 days of receiving the product, the product is in their original condition, and the product is not a consumable or software. Change of mind returns will only be eligible for a refund on the product’s sale price, and in some cases, a partial refund on the product’s sale price.

Items need to be returned within 30 days of delivery in its original un-opened and sealed packaging at buyer's cost. A restocking fee of 15% of the purchase price will be charged when the returned item has been opened or seal broken, since the item is no longer considered as brand new. If the item has been used, the restocking fee may be up to 50%. The shipping cost and restocking fee will be deducted from your refund.

12 Month Full Warranty