Garmin AIRMAR B164 20o Tilt Transducer
(Garmin 010-11010-20)
We Think You Should Know
- Accommodates Deadrise Angles of 16-24 Degree
- Ideally Works on Fiberglass & Wood Hulls
Overview
This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This flush-mounted housing protrudes less than a quarter of an inch outside the hull and can sit on trailer rollers/bunks without damage.
An 8-pin 1 kW transducer, it has a depth of 1,200 to 1,800 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 22x20 or 6x6 degrees; and mounts on a 16 to 24 degree deadrise angle.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
*Do not use on metal hulls. When using with a 6-pin Garmin sounder, a transducer adapter cable is required.
Orders are usually sent out within two business days, and you can expect to receive them within 5-10 business days.
At RYDA, we understand that your order is delivered promptly and with the utmost care; we use Star Track Express and Australia Post with a signature. If no one is home, your delivery will normally be redirected to the Local Australia Post Office for collection over the counter with a Photo ID. Please note that bulky deliveries over 5kg and in a few areas where it is not possible to redirect to the post office, the parcel may be held at the local courier depot instead. Where possible, our warehouse will try and use recycled cartons for our deliveries, just as safe and sturdy as a new carton but more friendly to the environment.
All returned products must be in new condition without damage to any of the packaging and contain all original packaging, manuals, accessories and other documentation as supplied by the manufacturer. If the item is returned in any condition other than new, a restocking fee may be applicable; see below.
OPENED and USED items are subject to approval depending on the condition of the unit and packaging. Any product returned to us that has been trialled, installed, used or demonstrated may be rejected. A minimum of 20% restocking fee applies to refunds and exchanges.
Any product returned with damage to the product, packaging, or removal of any bar code or manufacturer's label will be rejected and returned at the customer's cost.
Any items missing from the returned product will be subject to a replacement charge and deducted from the total refund amount, in addition to a restocking fee.
Return requests for commercial quantities must be approved case-by-case and may be subject to additional conditions.
Goods should be received at the warehouse within 2 weeks from the APPROVED return authorisation unless previously arranged.