Enerdrive B-TEC 100Ah Lithium Battery

Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v 100Ah & 36v 100Ah, the B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

The new Enerdrive B-Tec 100Ah has replaced the Enerdrive 12V 100Ah eLITE Lithium Battery. 

Smart Phone Monitoring System: The Enerdrive Enerdrive B-TEC  G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

Battery Management System: The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings: Lithium v AGM Capacities;

• 100Ah Lithium = 160Ah AGM
  • (Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

The Enerdrive B-TEC battery is perfect for camper trailers, 4WD's (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.

Please Note; The B-TEC battery is capable to be paralleled to a second B-TEC battery of the same size. For maximum performance and lifespan of your B-TEC battery, no more than 4 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single battery's BMS.

The 100Ah G2 battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.

If you are requiring a battery system larger than Enerdrive B-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.

Please note B-TEC batteries must not be installed -

• In vehicle engine bays or in high heat environments, refer to Section 10 - Battery Specifications of the manual.
• In wet areas such as caravan chassis mounts, open ute trays or boat deck areas.
• Inside compartments dedicated to carrying gas.

This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY.

Circuit Protection: The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.

Items are generally dispatched within 1-2 business days.

Please note that delivery times can vary. For Metropolitan areas, delivery time will typically be between 2-5 business days from dispatch. For rural and remote locations delivery time will typically be between 5-10 business days from dispatch.

We deliver Australia-wide, however some remote locations / islands are excluded.

DELIVERY NOTE: Please do not use P.O. Box, parcel collect or Aus Post addresses as most items are sent via courier and require a street address for delivery. 

Return Policy

Please find our Payments and Returns policy below. Please note if a product has been used in anyway, we are unable to accept it for return.

Unopened Products

You may return any "unopened" products and accessories within 14 days of delivery for a refund. Please send the item back to us in its original condition and packaging and we’ll refund your purchase price. The freight charges will need to be covered by the customer and a restocking fee equivalent to 20% of the purchase price will apply. Once the item has been returned and determined to be in good condition, your refund or credit will be processed. This is non-negotiable.

Opened Products

Opened products and accessories can be returned within 14 days of delivery and will be subject to a restocking fee equivalent to 35% of the purchase price to cover testing, cleaning and repackaging expenses. Simply return the item to us, shipping prepaid & using the most convenient shipping method available to you. Opened returns must be in saleable condition with original materials and packaging. Once the item has been returned and determined to be in good condition, your refund or credit will be processed.

All of our products are back by a manufacturers warranty. Each manufacturer’s warranty is different.

Details of the warranty period for each item is included on the product detail page on our website.