Fritz Master Test Kit (FR04009)

Fritz Liquid Test Kits - Master Test Kit (FR04009)

• Perfect for starting a new system

• Includes 4 Essential Test Kits

• Accurate in both Fresh and Saltwater

About Fritz Liquid Test Kits - Master Test Kit

Fritz Aquatics Master Test Kit contains four essential test kit formulas in one convenient box.

Wide Range pH

Testing the pH of your aquarium water regularly to make proper adjustments is crucial to keep your fish, plants, and other aquarium animals healthy and stress-free. pH is the measure of acidity or basicity of liquids. Acidic water will measure between 0 and 7 pH, while basic, or alkaline, water will measure between 7 and 14. Knowing your animals is important: the preferred pH range of each species in your aquarium can vary.

A consistent pH reading is more ideal than frequent changes up or down. pH is influenced in the aquarium by many factors, including the KH content, respiration, organic waste decomposition, even the ammonia cycle. Because of this, frequent testing is recommended. Established systems should be tested once a month, and new systems or aquariums with fish illness or death should be monitored more often. Establishing a baseline pH of your aquarium throughout your normal routine will help alert you to problems early on. Any unexpected pH change can indicate water quality issues and should be addressed right away.

Ammonia

Ammonia is one of the most important parameters to monitor in aquariums because any amount can be toxic to livestock if it is not addressed right away. Ammonia is commonly elevated in new tanks while establishing the beneficial biological filter. High ammonia can also be present in established aquariums from lack of maintenance, overstocking, or when the bio filter has been interrupted by medication. Ammonia can reach lethal levels very rapidly, and should be tested immediately in the case of fish illness or death. Monitor ammonia levels closely when using any medications or treatments.

The ammonia level in any tank should ideally always be at 0 ppm. Symptoms for acute and chronic ammonia poisoning include: heavy breathing and gasping at surface, clamped fins, discoloration, increased occurrence of disease, death.

Nitrite

Nitrite is produced continually during the ammonia cycle by nitrifying bacteria in the biological filter. While not as immediately toxic as ammonia, any accumulation of nitrite should still be addressed as soon as possible. The nitrite level will eventually be broken down to non-toxic nitrate. Regular testing for nitrite is recommended - chronic exposure to even low levels of nitrite can cause brown blood disease in fish, which can cause suffocation and death.

With the exception of a system establishing a biological filter and progressing through the nitrogen cycle, the nitrite level in any tank should ideally be zero.

Nitrate

Nitrate is considered the non-toxic end product of the ammonia cycle. While not directly a problem for fish at low levels, excess nitrates can cause stress and other water quality issues. Nitrate is continually produced as fish respire and released waste products move through the ammonia cycle, and can accumulate rapidly if not properly maintained. The nitrate level should be monitored regularly and routine maintenance is needed to keep concentrations low for a healthy aquarium. High levels of nitrate can also contribute to undesirable algae growth.

Directions & Dosage

To remove childproof safety cap, push down while turning. DO NOT allow Test Solutions to get into aquarium.

Wide Range pH

1. Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).
2. Add 3 drops of pH Reagent, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops added to the water sample.
3. Cap the test tube and gently shake several times to mix solution. Attention! Always use the cap. Avoid skin contact as this may affect the test results.
4. Immediately match the color of the solution against those on the pH chart to determine pH. Be aware that freshwater and saltwater results are different so ensure you are reading correct result.

For best results the tube should be viewed against the white area beside the color chart in a well-lit area with a light source behind you. The closest match indicates the pH in the water sample. Rinse the test tube with clean water after each use.

Corrective actions:

• To raise pH, use Fritz pH Higher or Fritz pH Neutralizer. To lower pH, use Fritz pH Lower or Fritz pH Neutralizer. Always limit any changes in pH to 0.2 units per day when fish are present in the water being treated.

Ammonia

1. Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).
2. Add 8 drops from Ammonia Test Solution Bottle #1, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops added to the water sample.
3. Add 8 drops from Ammonia Test Solution Bottle #2, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops to the water sample.
4. Cap the test tube and shake for 5 seconds.
5. Wait five minutes for the color to develop.

Read the test results by matching the color of the solution against those on the appropriate Ammonia Test Color Chart included in the box. Be aware Freshwater and Saltwater results vary slightly.

Corrective actions:

• Up to 0.5 ppm - reduce feeding, remove excess detritus and debris, add all-in-one filter media MaxOut or MaxOut Pro to reduce organics. Detoxify a...

We are more than happy to ship Australia wide. When you place an order we guarantee that your items will be shipped within 2 working days. If, for reasons beyond our control, we are unable to ship your order within 2 working days, you will receive an email informing you of the estimated delivery time-frame. At Aquarium Spare Parts we aim to ship your orders as efficiently as possible. If you have any queries or concerns regarding shipping time-frames or costs, please feel free to email us.

Due to the nature of the parts that we have available, it is difficult to calculate some shipping prices (as your order combinations vary). We do our best to provide you with accurate shipping prices, however if you are concerned about the shipping price - please contact us and we can double check it for you. All orders are shipped via Australia Post unless specified otherwise.

At Aquarium Spare Parts we strive to ensure that you are satisfied with the items that you receive. We do this by providing as much detailed and accurate information about the products that you are purchasing. We want you to love what you have ordered. If something isn’t quite right or if you’re not satisfied with the items that you have received, we want you to let us know. We encourage you to do this as soon as possible.

It is our intention to ensure you are satisfied with your entire online experience.

If you find you are not satisfied with an item that you have received, you are welcome to return it to us. We accept returns within 365 days of purchase when the item is in its original condition, with packaging & labels, unopened and unused. This does not include food, live plants or any other perishable items.

All returns within the 365 day period are required to include your receipt. Once we have received and accepted the returned item, a credit will be issued. Shipping or return shipping prices are not included in the refunded price.

You need to include the Return & Exchange Form along with the item(s) you are returning in their original condition and any packaging that came with it. Please note that whilst individual packaging can be opened, the box or container must not be ripped, damaged or the seals removed in order to be eligible for a refund or exchange.