Ness K-6311B D8XD Deluxe Panel & Noise Kit LCD Keypad K-6311B D8XD Deluxe Panel

NESS D8X PANEL & NOISE KIT (LCD KEYPAD)

• Flexible 8 Zone control panel & Dialler.
• The Ness D8x is the most versatile Ness 8 zone control panel ever!
• The D8x is available in Led keypad or LCD keypad models to suit any preference.supplied with keypad, plug pack, battery, telephone lead, housing and manuals.
  
  
• Panel & Siren Kits include the control panel complete with keypad, plugpack, battery, plus external horn speaker, siren cover, strobe light and internal screamer.
• Choose your detectors from the Ness Quantum range.
• Easy and convenient to order control panel and sirenkits.
• Pre-packed for shipping.

FEATURES:

• 8 Zones Tamper
• Onboard 3 Door Access Controller
• Auto-Time Control via onboard Real-Time Clock
• Optional Radio Interface for integrated wireless security
• Onboard Vibration Sensor Analyser
• Multiple programmable EOL resistor values from 0k to 22k
• 4 programmable auxiliary outputs
• Direct Connect or Dial-up programming via NessComms(TM)
• Contact ID and VOICE reporting dialler
• Remote control of outputs via telephone
• Up to 56 User Codes (PIN, RADIO KEY or PROX CARD)

SPECIFICATIONS:

• Box dimensions: 235w x 300h x 90d mm.
• Plug pack 240V Ac, output 17V Ac@1.4A.
• Power supply 13.8V Dc @ 800mA.
• Quiescent current draw 80mA with 1 keypad.
• Operating voltage 9.5V- 14V Dc.
• Rechargeable battery 12 volt 7.0 Amp/hour sealed lead Acid.
• Battery charging current 350mA maximum, current limited.
• Dynamic battery test backup battery is tested under load, hourly and on arming.
• Fuses:

1. 2 Amp auto resetting / siren output & reset output.
2. 500mA auto resetting / 12 volt auxiliary outputs.
3. 200 mA auto resetting / strobe output.

• Zone inputs: 8 2 x 24hr tamper inputs.
• End of line resistor choice of 12 programmable values including N/c. Default 2200 Ohms (2.2k)
• Maximum keypads: 3.
• Radio Header multi-pin connector for the Ness radio Interface.
• Serial Header serial data port for direct connect programming using Nesscomms(TM) software. Also 2 way serial data (V5.6 )
• Reader Header: multi-pin port for connecting up to 3 Ness proximity access card readers via 106-012 Weigand Interface.
• Siren output: on board siren driver with timed output maximum 3 x 8 Ohm horn speakers.
• Strobe output: 12V Dc timed output. maximum 2 x 1 Wattstrobe lights.
• Reset output: 12V Dc timed output. max. 3 x 12V piezo screamers.
• Equipment power output: 13.8V Dc output for powering detectors and other equip-ment. maximum 500mA.
• AuX Header: multi-pin connector provides outputs Aux1,Aux2, Aux3, Aux4, 12V Dc.

Ship out the order within 24-48 hours.

Change of mind:
Customer can return the item if purchased by mistake within 14 days of the customer’s order being received.

Change of mind returns will only be eligible for a refund on the product’s sale price within receiving the item'. Return postage is paid by the customer.

Warranty

Without prejudice and to the extent allowed by the Trade Practices Act 1974, The Australian Consumer Law and Competition and Consumer Act 2010, all hardware sold by MAD Electronics Australia is covered by one year limited warranty and is also backed by Australian manufacturer warranty. Where the manufacturer warranty period exceeds one year, we will advise the customer to contact the manufacturer directly for warranty support after the first year of purchase. Due to the nature of consumables products and software, they are not returnable or refundable items.

Any defective products purchased from MAD Electronics Australia and affiliates that fall within the warranty period provided will be covered, unless they fall within the following conditions:

· Physical Damage on the product not caused in the event during transit or Dead on Arrival (DOA) but caused due to mishandling, incorrect use of product for its purposes, improper installation of product, by accident, insect or vermin infestation, improper method or failure to maintain service and handle the item with reasonable care.

· The product has been modified using unauthorised methods. Any modifications on the product including physical and software modifications using third party unauthorised software such as third party firmware updates will void the warranty of products.
· The warranty seal or serial number of the item has been tampered with.
· The item has been serviced by another party other than madelectronics
· Consequential loss including but not limited to data, programs, software or other information stored on storage products, computer or laptop systems.
· Software

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.