D-Link DGS-712 SFP 1000 BASE-T Copper Transceiver
1000Base-TX RJ45 SFP Transceiver - 100m
Features/Specifications:
Standard: IEEE 802.3ab 1000BASE-T Gigabit Ethernet
Transceiver Type: SFP (Small Form Pluggable)
Connector: RJ-45
Auto MDI/MDIX: Automatic crossover detection enabled, External crossover cable not required
Data Rate: 1,000 Mbps (IEEE 802.3 compatible), 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only
Cable Type: Cat. 5 twisted-pair cable
Maximum Cable Distance Coverage: 100 meters
Supply Current: 350mA (typical), 400mA (maximum), 1.3W max power over full range of voltage and temperature *
Input Voltage: 3.1V (minimum), 3.3V (typical), 3.5V (maximum), Referenced to GND
Maximum Voltage: 4V
Surge Current: 30mA, Hot-plug above steady state current *
Operating Temperature: 0 to 85 C
Storage Temperature: -40 to 85 C
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Extended case temperature range
Fully metallic enclosure for low EMI
Low power dissipation (typical 1.2 watts)
RJ-45 connector assembly
Access to physical layer IC via 2-wire serial bus
10/100/1000 BASE-T operation in host systems with
SGMII interface
Gigabit Ethernet over Cat. 5 cable
+3.3V electrical power interface
Fast Australian Delivery by reliable companies such as Star Track and Australia Post. We deliver products from warehouses in every Australian city. Delivery time varies by location, please see the expected timeframe to receive your product below:
Metro: 1-4 business days
Regional: 1-6 business days
If you are unavailable at the time of delivery some products may be left at a safe location, and some products may require re-delivery fees to be applied.
Faulty Goods Returns
If you believe you have purchased a faulty product, you must provide proof of purchase to receive a repaired or replacement product in line with Australian Consumer Law (ACL). Proof of purchase may be your original register receipt, credit card statement or any other form of evidence. Soundz Store Australia may have the faulty product assessed by a third-party certified repair agent to determine the nature and cause of the fault. Soundz Store Australia reserves the right to decline an exchange, refund or repair where any product fault is caused by misuse or neglect. Soundz Store Australia reserves the right to replace a faulty product preferentially to a refund such that a refund will only occur when a repaired, replaced or equivalent product cannot be supplied to customer as a remedy. Manufacturer Warranties in addition to ACL are detailed as relevant for each premium brand. Most of our premium products are supported by a 12 month warranty. This warranty covers all manufacturer faults with the product. Some of our products may have a different warranty period, please check the product description for this. Should an issue arise with your order, please contact us via your MyDeal Account to raise a warranty claim.