AUSTRALIAN MONITOR 4 Channel Mono Mixer Australian Monitor
Australian Monitor - ESMIX 4 Channel Mono Mixer
The Australian Monitor ESMIX is the latest evolution of our Essentials series of Mixers, now featuring 2 channels ofpriority VOX muting an integrated tone generator with a modern look and finish.
The mixer maintains the core features you expect including four XLR mic/dual RCA line inputs, record and lineoutputs and 12V phantom power.
The ESMIX offers the latest features to meet projects requiring the most cost-effective solutions.
Key Features
- 4 microphone/line input mono mixer
- Master volume, treble and bass controls
- Line and Record Level Outputs
- Input 1,2 vox muting priority
- Integrated tone generator. Evac/Alert/Interuder/Bell/Chime tones
- 12VDC phantom power
- 1 RU rack mountable chassis
LINE AND RECORD OUTPUTS
The ESMIX and ES Mixer Amplifiers feature both a Line and Record Output.
These outputs can be used to link additional power amplifiers to increase the required output channels or totalpower requirements.
PRIORITY MUTING & PHANTOM POWER
The ES series offer two channels of priority muting control.
Using selectable DIP switches on the rear of the product, different configuration modes can be selected as shown in the table.
Use the priority muting to perform talk over functions which mute background music inputs when audio is detected on a priority input channel.
Phantom power is also provided which, when activated, provides 12 volts to condenser microphones on the XLR inputs.
EMBEDDED TONE GENERATOR
The ES120, ES250 and ESMIX products embed a tone generator which can play 5 internal tones.
A rear panel connector allows the tones to be played by connecting any of the pins to the ground terminal.
A tone volume control is also provided to change the toneto the desired level.
When a tone is playing Channels 2, 3 and 4 are muted.
Channel 1 is not muted to allow, if required, microphone messaging over the tone.
Specifications
| Total Inputs | 4 | Frequency Response | 20Hz - 20kHz |
| Input Channels | 4 MIC or Line | THD+N | < 0.5% |
| Output Channels | 1 Mono | Signal to Noise Ratio | > 84dB |
| Mounting | 1RU | Input Sensitivity | MIC: 1.2mV / Line: 160mV |
| Warranty | 5 years | Input Voltage | 100-240Vac 50-60Hz |
| Product Dimensions (W x D x H) |
182mm x 192mm x 44mm | Shipping Dimensions (W x D x H) |
500mm x 305mm x 134mm |
| Net Weight | 2.5 Kg | Shipping Weight | 3.5 Kg |
| GTIN EAN | 9323383020122 |
Ship out the order within 24-48 hours.
Estimated Delivery Time Frame: 2 - 15 business daysChange of mind:
Customer can return the item if purchased by mistake within 14 days of the customer’s order being received.
Change of mind returns will only be eligible for a refund on the product’s sale price within receiving the item'. Return postage is paid by the customer.
Warranty
Without prejudice and to the extent allowed by the Trade Practices Act 1974, The Australian Consumer Law and Competition and Consumer Act 2010, all hardware sold by MAD Electronics Australia is covered by one year limited warranty and is also backed by Australian manufacturer warranty. Where the manufacturer warranty period exceeds one year, we will advise the customer to contact the manufacturer directly for warranty support after the first year of purchase. Due to the nature of consumables products and software, they are not returnable or refundable items.
Any defective products purchased from MAD Electronics Australia and affiliates that fall within the warranty period provided will be covered, unless they fall within the following conditions:
· Physical Damage on the product not caused in the event during transit or Dead on Arrival (DOA) but caused due to mishandling, incorrect use of product for its purposes, improper installation of product, by accident, insect or vermin infestation, improper method or failure to maintain service and handle the item with reasonable care.
· The product has been modified using unauthorised methods. Any modifications on the product including physical and software modifications using third party unauthorised software such as third party firmware updates will void the warranty of products.
· The warranty seal or serial number of the item has been tampered with.
· The item has been serviced by another party other than madelectronics
· Consequential loss including but not limited to data, programs, software or other information stored on storage products, computer or laptop systems.
· Software
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
