NESS Radio Controlled Keypad Suits Ness Panels With 100-200

WIRELESS RADIO KEYPAD - NESS

The Ness RKP Radio Keypad is a wireless, battery operated keypad which provides remote control of arming, disarming, monitor (home) modes and panic facility. RKP isideal for situations where full keypad functions are required and cables cannot be run. Up to 15 user codes canbe programmed in the RKP with 14 individual IDs transmitted to compatible Ness panels.

The aux 1 and aux 2 buttons can be used to control auxiliary outputs at the control panel, (e.g. optional lighting, garage doors). The RKP is designed for use with compatible Ness control panels via the 100-200 radio interface but can also be used with other Ness receivers.

• 9V LITHIUM BATTERY OPERATION
• 15 USER CODES STORED ON BOARD
• CAN BE USED AS A PORTABLE KEYPAD
• COMPATIBLE WITH ALL NESS CONTROL PANELS
• EXTRA KEYPAD FOR DIFFICULT TO CABLE PREMISES
  

FEATURES:

The Ness Radio Keypad (RKP) is a wireless, battery operated keypad designed for use with any Ness control panel which is compatible with the 100-200 Radio Interface.*

The Radio Keypad provides remote control of Arming, Disarming, Monitor (Home) modes and Panic facility. Up to 15 User Codes can be programmed in the RKP. The ID for each code can be mapped to a compatible Ness control panel to report Arming/Disarming by User ID.

In addition, the AUX 1 button can be programmed to drive AUX 1 output at the control panel and AUX 2 can be used with the MCR receiver.

When used with a compatible Ness control panel and Radio Interface, the RKP can be used alongside Radio Keys and hardwired keypads.

Ness Radio Keypads can be: Fixed - used in place of hardwired keypads in cases where it is not practical to run cables

Portable - carried from room to room, kept in a vehicle, bedside table.

* Receivers are sold separately.

SPECIFICATIONS:

• Dimensions : 90W x 135H x 27D mm (with lid closed).
• Compatibility :
  • 100-200 Ness Radio Interface. (Ness D8, D16, D24)
  • 100-187 Ness 1ch Standalone Receiver.
  • 100-666 Ness MCR receiver.
• Keypad functions :
  • Arming by User ID
  • Disarming by User ID
  • Home mode
  • Panic alarm
  • Aux 1 (to D8 & D16 panels)
  • Aux 2 (to MCR Receiver)
• Audible indicator : Onboard beeper for feedback: keypress, valid command, error.
• Visual indicators :
  • VALID LED: indicates program modes, valid signal.
  • LOW BATTERY LED: indicates RKP low battery, option enabled (program mode).
• Battery : 9V Lithium (Ultralife U9VL)
• Quiescent current draw : 11uA
• Radio transmitter : SAWR stabilised
• Radio frequency : 303.875MHz
• Transmit power : 100uW PEP

Ship out the order within 24-48 hours.

Change of mind:
Customer can return the item if purchased by mistake within 14 days of the customer’s order being received.

Change of mind returns will only be eligible for a refund on the product’s sale price within receiving the item'. Return postage is paid by the customer.

Warranty

Without prejudice and to the extent allowed by the Trade Practices Act 1974, The Australian Consumer Law and Competition and Consumer Act 2010, all hardware sold by MAD Electronics Australia is covered by one year limited warranty and is also backed by Australian manufacturer warranty. Where the manufacturer warranty period exceeds one year, we will advise the customer to contact the manufacturer directly for warranty support after the first year of purchase. Due to the nature of consumables products and software, they are not returnable or refundable items.

Any defective products purchased from MAD Electronics Australia and affiliates that fall within the warranty period provided will be covered, unless they fall within the following conditions:

· Physical Damage on the product not caused in the event during transit or Dead on Arrival (DOA) but caused due to mishandling, incorrect use of product for its purposes, improper installation of product, by accident, insect or vermin infestation, improper method or failure to maintain service and handle the item with reasonable care.

· The product has been modified using unauthorised methods. Any modifications on the product including physical and software modifications using third party unauthorised software such as third party firmware updates will void the warranty of products.
· The warranty seal or serial number of the item has been tampered with.
· The item has been serviced by another party other than madelectronics
· Consequential loss including but not limited to data, programs, software or other information stored on storage products, computer or laptop systems.
· Software

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.