AUDAC Audac 120W 100V Mixer Amp 5 Zones - 100V
AUDAC COM12 PUBLIC ADDRESS AMPLIFIER 120W - 100V
The COM series public address mixing amplifiers are providing an ideal solution for small to medium size commercial sound systems.
Different configurations in terms of output power and connectivity provide an enormous flexibility for numerous applications.
The COM12 is capable of delivering an output power of 120Watt to 100 Volt constant voltage systems or 4 Ohm low impedance loads.
Six input channels with individual level control allow connectivity and mixing to a wide variation of music sources.
Four balanced microphone inputs (XLR) containing phantom power (15 V) and two priority allow connection for almost any (dynamic or condenser) microphone.
Two inputs selectable between stereo balanced line (RCA) and microphone (6.3 mm Jack) allow connection for any sourcesuch as CD-player, computer or portable device, or enable toexpand the total microphone count to 6.
The remote microphone and tele-paging inputs allow expansion of the system with a paging station (with chime tones) or couple the system with your business telecom system (or any other priority line source).
Using the priority mute contact, coupling and muting can be done through an external fire alarm system.
The output level can be adjusted using a master volume control accompanied with 2-band tone regulation.
The level is indicated with a 5-segment VU-bar while output selection is made possible using an integrated 5-zonespeaker switcher.
Both table-top installation or 19" (2HE) equipment rack mounting is made possible using the included adapters.
- 5-Zone output selector
- Master volume with 2-band tone control
- Individual input volume / mixing control
- Included rack ears for 19" rack mounting
- Terminal block output connections for 5 zone outputs (Hi-Z)
- Terminal block 4? output connection
- Mic / line inputs with priority (2x) & Phantom (4x)
- Mic / line inputs
- Remote inputs, chime & mute contacts
- Link in- & outputs
| SYSTEM SPECIFICATIONS | |||
|---|---|---|---|
| RMS Power | 120 W | ||
| Signal / Noise | > 90 dB | ||
| THD N (@ 1 kHz) | < 0.5% | ||
| Crosstalk (@ 1 kHz) | > 70 dB | ||
| Technology | Class A/B | ||
| Common mode rejection ratio | 70 dB | ||
| Protection | DC Short circuit | ||
| Over heating | |||
| Over load | |||
| Signal limiting | |||
| Cooling | Convection cooled | ||
| Operating temperature | 0o ~ 40o @ 95% Humidity | ||
| Frequency | Response ( 3 dB) | 20 Hz - 20 kHz | |
| Power | Supply | Transformer | |
| Source | 230 ~ 240 V AC / 50 ~ 60 Hz | ||
| Inputs | Other | Remote mic (Priority mic chime) | |
| Tele-paging (Priority line) | |||
| Priority mute contact | |||
| Outputs | Connector | 2-pin Euro Terminal Block (Pitch - 5.08 mm) | |
| 10-pin Euro Terminal Block (Pitch - 5.08 mm) | |||
| Voltage / Impedance | 100 V / 4 ? | ||
| Inputs | Balanced Microphone 1 - 4 | Type | 4 x Balanced Mic./Line (-6 dB / -50 dB) |
| Connector | 2 x XLR/Jack Combo & 2 x XLR | ||
| Other | 4 x 15 V DC Phantom & 2 x Priority | ||
| Balanced Microphone 5 | Type | 1 x Balanced Mic./Line (-6 dB / -50 dB) | |
| Connector | 6.3 mm Jack | ||
| Unbalanced Stereo | Type | 1 x Stereo Unbalanced Line ( 14 dB / -30 dB) | |
| Connector | RCA |
| PRODUCT FEATURES | ||
|---|---|---|
| Dimensions | 420 x 88 x 320 mm (W x H x D) | |
| Weight | 9.700 kg | |
| Mounting | 19" / 2 HE or tabletop | |
| Construction | Steel | |
| Colours | Black | |
| Accessories | Included | 19" Rackmount adapter |
Ship out the order within 24-48 hours.
Estimated Delivery Time Frame: 2 - 15 business daysChange of mind:
Customer can return the item if purchased by mistake within 14 days of the customer’s order being received.
Change of mind returns will only be eligible for a refund on the product’s sale price within receiving the item'. Return postage is paid by the customer.
Warranty
Without prejudice and to the extent allowed by the Trade Practices Act 1974, The Australian Consumer Law and Competition and Consumer Act 2010, all hardware sold by MAD Electronics Australia is covered by one year limited warranty and is also backed by Australian manufacturer warranty. Where the manufacturer warranty period exceeds one year, we will advise the customer to contact the manufacturer directly for warranty support after the first year of purchase. Due to the nature of consumables products and software, they are not returnable or refundable items.
Any defective products purchased from MAD Electronics Australia and affiliates that fall within the warranty period provided will be covered, unless they fall within the following conditions:
· Physical Damage on the product not caused in the event during transit or Dead on Arrival (DOA) but caused due to mishandling, incorrect use of product for its purposes, improper installation of product, by accident, insect or vermin infestation, improper method or failure to maintain service and handle the item with reasonable care.
· The product has been modified using unauthorised methods. Any modifications on the product including physical and software modifications using third party unauthorised software such as third party firmware updates will void the warranty of products.
· The warranty seal or serial number of the item has been tampered with.
· The item has been serviced by another party other than madelectronics
· Consequential loss including but not limited to data, programs, software or other information stored on storage products, computer or laptop systems.
· Software
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.


