6 KW Sauna Heater 220V Dry Sauna Stove Stainless Steel External Control Home SPA
✿PRACTICAL PERSONAL✿: The control system also has a signal device that displays when the meter and temperature regulator are turned on. Depending on the size of the sauna room, after 30-60 minutes, the sauna stove can reach the set temperature, and the thermostat can ensure that the sauna room maintains an even and comfortable temperature. The machine is easy to install and can be placed in a sauna room by adjusting the leg support frame.
✿MULTIPLE FUNCTION✿: Suitable for medium and small bathroom. The sauna furnace is made of high temperature resistant zinc and magnesium plate with built-in control system placed on the right or left side of the furnace body. Install the sauna stove to the wall by yourself with the equipped screw; the stove can also be installed with the lowest height of 1900 mm. The wall behind the stove shall not be covered with cement, board or similar material.
✿HIGH QUALITY & INTELLIGENT✿: Install the sauna stove to the wall by yourself with the equipped screw; the stove can also be installed with the lowest height of 1900 mm. The wall behind the stove shall not be covered with cement, board or similar material. Because the cladding will cause the wall material to exceed the allowable temperature limit; Qualified materials should be selected for the wall and ceiling.
✿EASY OPERATION✿: Connection of power cord: 1. Connection of power cord shall be completed by professional electrician with current specifications. Use REVE rubber insulated cable (or similar) to connect to the main power source of the furnace; The connection box of the stove is equipped with a terminal and the section of the connection wire is the same as the power wire of the sauna stove.
✿STORAGE✿: Sauna stones may contain dust, so it is recommended that they be washed before being placed in the stone bin. The largest stones should be placed at the bottom, not too tight, leaving room for ventilation. Stones must be replaced when they begin to peel to avoid damaging the sauna stove. Stones are usually 3-8 centimeters in diameter. Temperature control: thermostat can control the temperature at the ideal state.
- Item Type: Sauna Stove
- Material: Stainless Steel
- Power: 6KW
- Use Space: 5-9m / 16.4-29.5ft
- Furnace Tube Voltage: 220-380V
- Suitable for: Apartments, hotels, indoor swimming pools, saunas, sweat rooms, fitness centers and other commercial facilities.
- Lateral Minimum Distance: Approx. 10cm / 3.9in
- Above 500mm Shelf on the Ground Minimum Distance: Approx. 15cm / 5.9in
- Suspended Ceiling Minimum Distance: Approx. 110cm / 43.3in
- Ground Minimum Distance: Approx. 18cm / 7.1in
- Size: Approx. 57 x 41 x 28cm / 22.4 x 16 x 11in
- External Control Device Size: Approx. 24.5 x 22 x 8cm / 9.6 x 8.7 x 3.1in
- Weight: Approx. 10750g / 379oz
- 1 x Sauna Stove
- 1 x External Control Device
- The power switch is the main power switch of the sauna stove.
- Note that the upper screw should be tightened properly, leaving a 3mm between the screw head and the wall.
- Place sauna stone: After installing the sauna stove and controller, place an appropriate amount of sauna stone (10-15kg) on the sauna stove.
- Installation of temperature sensor: 1. Carefully remove the cover on the of the circuit board of the temperature sensor with a small screwdriver. 2. Fix the circuit board of the temperature sensor directly above the sauna stove with screws. 3. Put the cover on the circuit board of the temperature sensor.
We ensure all the items gets dispatched within 1-2 business days. More than 90% of the item gets delivered within 2-6 business days.
All of our new items comes with 1 year warranty.
If the product is faulty, it can be returned and we will help accordingly. Change of mind for some products may cost shipping fee to customer.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and loss or damage.