PRO2 Hdmi2.0 Usb-C Over Cat6 Wall Plate Extender 70M Usb-C Pd 65W Switch Ir

HDMI2.0 and USB Type-C 4K 60Hz up to 70M wall plate extender with IR, RS232, POC, S/PDIF, Audio extraction, PD 65W charging.

Features

• HDMI2.0 + Type-C Extender in North American standard Wall plate to Box Kit
• Support HDMI or USB-C input, with the Switch button on the wall plate
• Transmit up to 70m(229ft) under 4K60Hz YUV4:4:4 or 1080p over a single Cat5e/6 cable
• Type-C input(USB3.0) supports 4K60hz, PD power charging(65W max)
• HDCP2.2/ 1.4 Compliant
• Support EDID management
• Support HDR10, POC and RS232 pass-through
• Support one-way wide-band IR pass-through
• Support S/PDIF and PCM2.0 analog audio extraction(at RX)
• Support Dolby True HD, PCM, and DTS-HD master audio 7.1CH
• Support RS232/ Micro USB port for firmware upgrade
• Support auto-detect and switch to either one of the sources when there is a signal

Note: The USB Type-C only does the video transfer and PD charging, no data transfer.

Requires IEEE-568B cable termination standards and solid core cable. Use Solid/FTP CAT5/6 cables if you are running a cable 15 metres or more.

Sepcifications

What is in the box?

• 1 x HDMI Wallplate Transmitter
• 1 x HDMI Receiver
• 1 x IR TX Emitter
• 1 x IR RX Receiver
• 1 x 24V/5A DC power supply with Phoenix connection
• 1 x User Manual
• 1 x Decoration panel
• 1 x pair x mounting ear for receiver
• 1 x pair x phoenix connector
• 1 x set of screws

Ship out the order within 24-48 hours.

Change of mind:
Customer can return the item if purchased by mistake within 14 days of the customer’s order being received.

Change of mind returns will only be eligible for a refund on the product’s sale price within receiving the item'. Return postage is paid by the customer.

Warranty

Without prejudice and to the extent allowed by the Trade Practices Act 1974, The Australian Consumer Law and Competition and Consumer Act 2010, all hardware sold by MAD Electronics Australia is covered by one year limited warranty and is also backed by Australian manufacturer warranty. Where the manufacturer warranty period exceeds one year, we will advise the customer to contact the manufacturer directly for warranty support after the first year of purchase. Due to the nature of consumables products and software, they are not returnable or refundable items.

Any defective products purchased from MAD Electronics Australia and affiliates that fall within the warranty period provided will be covered, unless they fall within the following conditions:

· Physical Damage on the product not caused in the event during transit or Dead on Arrival (DOA) but caused due to mishandling, incorrect use of product for its purposes, improper installation of product, by accident, insect or vermin infestation, improper method or failure to maintain service and handle the item with reasonable care.

· The product has been modified using unauthorised methods. Any modifications on the product including physical and software modifications using third party unauthorised software such as third party firmware updates will void the warranty of products.
· The warranty seal or serial number of the item has been tampered with.
· The item has been serviced by another party other than madelectronics
· Consequential loss including but not limited to data, programs, software or other information stored on storage products, computer or laptop systems.
· Software

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.