Veet Hair Removal Wax Warm 375g

With Essential Oils - Water Rinsable. Salon Professional Results. With Precision Spatula. Shape adapted to different body parts. Temperature Indicator.

Veet Warm with Essential Oils is a quick and easy way of removing unwanted hair for up to 4 weeks with long lasting results, while enjoying a relaxing fragrance.

1. Simple and easy to use: Simply heat the wax for approximately 1 minute in the microwave* or 10 minutes in boiling water. The Temperature Indicator on the end of the Precision Spatula tells you if the wax is too hot. Apply the wax with the Precision Spatula, then press on the strips straight away and remove quickly. Any wax residues can be easily rinsed off with water.


2. Dermatologically tested: Its formula, based on natural ingredients, leaves your skin moisturised. Veet Warm Wax has been tested under dermatological control.


3. Relaxing Essential Oils: Veet Warm Wax with Essential Oils, known for their relaxing properties, surrounds you with a relaxing fragrance.


4. Long lasting results: Because Veet Warm Wax removes hair right from the root, the hair takes longer to grow back. So you don't have to wax again for up to 4 weeks.

*Follow microwave heating instructions in Directions for Use leaflet.

• Microwaveable.


• Boiling Water.


• With Strips.


• Water Rinsable Formula.


• Precision Spatula with Temperature Indicator.


• Dermatologically Tested.

Glucose, Fructose, Maltose, Water, Citric Acid, Potato Starch, Parfum, Citral, Limonene Linalool.

How to apply the Wax: Using the correct part of the spatula, apply thin layers of wax onto the skin in the direction of hair growth. The thinner the layer, the more effective the results. The area covered by the wax should be shorter than the strips. Never cover the whole area with wax in one go. How to remove the wax: Immediately place the strip over the layer of wax, ensuring that there is at least 1 cm at the bottom which is wax free. Smooth the strip over the wax in the direction of hair growth. Hold the skin taut with one hand and with the other hand, grip the bottom of the strip. In one swift and decisive movement, remove the strip against the direction of hair growth. Never lift the strip upwards, but keep it parallel and as close to the skin as possible. To relieve discomfort, apply pressure on your skin with your hands. Repeat as necessary. The same strip can be used several times. How to use on individual areas: Legs: Apply wax from knee to ankle. Remove the strip from ankle to knee. Underarms: To reduce any excess of moisture, we strongly recommend applying talcum powder before waxing. Cut the fabric strip to a suitable size. Underarm hair tends to grow in 2 different directions, so requires removing in 2 stages. Lift the elbow up and well back for the skin to be taut. Use the correct part of the spatula to apply the wax. For the upper part of the underarm, apply the wax in thin layers upwards towards the elbow. For the lower part of the underarm, apply the wax in the opposite direction. Remove the strips against the direction of hair growth. Bikini Line: Cut the fabrics to a suitable size. Only use on small areas at a time. Use the correct end of the spatula to apply the wax. Hold the skin taut, and apply a thin layer of wax in the direction of hair growth. remove the strip against the direction of hair growth. Upper Lips: Treat each side of your lip (left and right) separately. cut the fabric strip to size. Use the correct part of the spatula to apply the wax. Hold the skin taut and apply a thin layer of wax above one side of the upper lip in the direction of hair growth. Repeat on the other side of the lip. After Waxing: This wax water-rinsable allowing you to rinse off any residues with water. After use, strips may be rinsed by hand with water only, and dried in order to be re-used for the next hair removal session. Rinse the spatula with warm water and allow to dry before putting it back into the box. Using a damp cloth, remove the excess wax from the edges of the jar and the lid before closing it. During this, it is important that the wax does not come into contact with water as it becomes ineffective. Heating in the Microwave: Always check the heating times with a watch to ensure safe use. Heat the wax in your microwave as per the guidelines below, at full power. Heating in Water on Stove: Fill a saucepan with water, ensuring the water level is not higher than the wax content in the jar. Once the water has boiled, reduce the heating to minimum and simmer the jar as per the guidelines in the table below. Do not allow saucepan to boil dry or the water to come into contact with the wax or the wax to boil as this will render it ineffective.